192.168.l.0 IP Router Login.
How do I log in to my router admin page via the 192.168.l.0 (192.168.0.1) IP Gateway?
Learn how to log in to your router admin to change settings, User ID and password. Read about the most common mistakes that LAN users make when attempting to log in to their router setup page.
The 192.168.l.0 Router Gateway. What is it?
The IP address 192.168.l.o is a common mistyping of the 192.168.0.1 IP address. When LAN users are attempting to reach the router login page via the 192.168.1.0 IP gateway, the most frequent mistakes are to type either 192.168.l.o, 192.168.1.o or 192.168.0.l in the browser address bar, resulting in a error message or a time-out (see the troubleshooting section).
The correct 192.168.0.1 IP address is a often used default IP address for commercial broadband routers, like D-Link and Netgear. Every router device and computer connected to the internet will have an IP address (Internet Protocol address).
If your router brand use the 192.168.0.1 IP address as the default access point, then this IP is also is also used to access router admin settings. You will be able to log in to your router admin page, and change your router username, password and privacy settings.
How do I Access my Router Login Page (via 192.168.0.1)?
Go to http://192.168.0.1 or enter 192.168.0.1 in your browser’s URL address bar and press enter (Chrome, Mozilla, Safari, Internet Explorer). This should open your admin login page.
You will need to enter your router admin username and password. If you don’t know what your router username and password are, then check the back of your router or check in the manual. All new routers have a default factory set username and password. You can also see our list of default router admin usernames and passwords for most popular router brandnames.
If you or a household member have set up a new username or password, and you have forgotten it, then you should reset your router to the default settings, by holding in the small round button at the back of the router with a pen for about 10 seconds.
I still cannot log in to 192.168.0.1. What am I doing wrong?
To log in to your router’s admin page, you will need to entering 192.168.0.1 in your browser’s URl address bar, and presse enter. If you are getting a time-out error message, or the wrong webpage is opening, then it could be because:
- You have probably mistyped the IP address. An IP address consists numbers and full stops. A mistake is to write 192.168.o.1 in the address bar (entering the letter o instead of the number 0) or 192.168 l 0 (using the letter L instead of 1, or with the 1 and 0 reversed as in the example above). If you wrote 192.168.1.0, 192.168.l.0 or 192.168 10 in the browser address bar, then you have made a mistake. An example of a correct IP address is 192.168.0.1 (LinkSys, Netgear), or 192.168.1.10.1 (3COM routers), or perhaps 192.168.0.10 or
192.168.0.101 (DELL routers). The correct router IP address depends on your router brand.
- Your router’s IP address is not necessarily 192.168.0.1. This is a widely used default IP address for routers, but most brands actually use another IP address. The most common are: 192.168.1.1, 192.168.2.1, 192.168.1.254, or 10.0.0.1. Try entering these IP addresses, one by one, in your browser’s address bar, and press Enter.
- You could have entered the IP address as a normal website address and included the www or the HTTPS protocol. Try again and enter 192.168.0.1 in your browser address bar and press enter. Http://192.168.0.1 will also work. Do NOT enter www.192.168.0.1 or https://192.168.0.1.
- A frequent mistake is to enter 192.168.0.1 in the Google or Bing Search Bar instead of your browser’s URL address bar. Enter the IP address where you enter any other website URL. Then hit ENTER.
- You could have forgotten to enter the “Full Stops” in the IP address. The router IP address is 192.168.0.1 and not 19216801, 192.168.01, 192.168.0 1 or 192 168 0 1.
- Your router could be broken or unplugged.
Please share your tips, recommendations or questions in the comment section.